What should I do to prevent the gear reducer from malfunctioning?

What should I do to prevent the gear reducer from malfunctioning? ? To carry out regular gear reducer inspection, the main inspection contents are as follows:

1. Check whether the oil temperature of the reducer and the temperature of the bearing part are within the allowable range, and the allowable range should be adjusted according to the external temperature;

2. Check if the reducer has abnormal vibration and abnormal noise during the operation;

3. Check the upper and lower joint surface of the reducer and the position of the bearing end cover for oil leakage. If it is necessary to deal with it in time;

4. Regularly check the cleanliness of the lubricant;

5. When the reducer stops running, check the internal components such as gears and shafts through the observation holes.

Summary: Because the bearing damage is a common factor causing the failure of the reducer, and the bearing part is difficult to detect (it needs to stop and disassemble the bearing end cover to check, it takes a lot of time), so you can open a bearing end cover of the reducer. Observe the hole for easy inspection at any time. Check the external sanitation of the gear unit to work as much as possible in a better environment.