The Specific Cause Of Overheating Of The Motor Caused By The Synchronous Wheel

People who often use synchronous wheels know that synchronous wheels in the application, although not easy to fail and damage, but because of a number of factors, resulting in the device's motor overheating phenomenon.

For its specific causes of motor overheating, the following are mainly: Reason one: The motor does not apply.

If the medium gravity is larger than the configuration motor because the motor is not applicable, it will inevitably cause the motor to overheat when it is driven. Reason two: The filler cover is too strong.

If the synchronous wheeled filler cover is too strong, it will affect the normal operation of the motor and cooling effect, which in turn will lead to the phenomenon of overheating of the motor. Reason three: Mechanical seal spring is too tight.

If you adjust the mechanical seal spring too tight, it will increase the operating burden of the synchronous belt wheel, in this case, will also cause the motor to overheat phenomenon. Reason four: The assembly quality of the pump is not good.

If the application of synchronous wheeled equipment, there is a poor quality of pump assembly, especially the presence of friction or the motor and pump shaft does not concentric, it is very easy for the motor to live like this problem. Reason five: The joint effect of the wheel and axis is not good. If the synchronous belt wheel is connected with the shaft, there is a certain transmission gap, it will affect the normal operation of the belt wheel, resulting in overheating of the motor.