Introduction To Couplings
Sep 08, 2019
Literally, it can be seen that it is a mechanical component connecting two axes, is a necessary component in many mechanical products, especially in many industrial production supplies, coupling is indispensable.
Coupling synth steaming effect on mechanical products is also very critical, especially in the contemporary social development of the product quality is very heavy.
Coupling is a device that connects two axes or shafts with rotating parts, rotates together during the transmission of motion driving forces, and is generally not loose. Sometimes also used as such a safety device to avoid being connected parts to bear excessive load, with overpressure protection effect.
Most of the common couplings have been normalized or standardized, and in general condition only the types of couplings must be properly selected, and the model specifications and specifications of the couplings must be identified.
If necessary, the strength of the load work capacity of the weak point of the consumables can be carried out, and the rotation of the centripetal force and elastic elements of its edges should be calculated in a column when the speed ratio is high, and balanced checking can be carried out.
The main materials of the coupling are pig iron and cast steel, how can these two materials be distinguished?
1. Material: cast steel parts of the carbon content is small, good ductility, so the use of steel than cast iron, steel not only has excellent plastic deformation, and steel products with high pressure strength.
The wroughtable cast iron in pig iron is the raw material of this high-tough pig iron, its comprehensive type can be close to steel, but also according to its excellent characteristics, has been successfully used to forge some supporting parts, high strength, ductility, wear resistance requirements of higher components.
2. Chroma: the appearance of the naked eye to observe cast steel parts than pig iron bright;
3. Sound: pig iron knock sound low, cast steel hit sound crisp and pleasant; 4. Oxygen cutting: iron cut continuously.
The key difference between cast steel and pig iron is that the process specification is different, i.e. the carbon content in the cast steel component is less than 2%, while the pig iron is more than 2% higher. 5. Strength. As customers buy couplings, focus on quality issues, the strength of cast steel parts in 35 degrees or so, while the strength of pig iron in 15-20 degrees or so.






